Adjusting Suction Power - Philips FC9160 Bedienungsanleitung

adjusting suction power

During vacuuming, you can adjust the suction power.
- Use maximum suction power to vacuum very dirty carpets and hard
loors.
Use minimum suction power to vacuum curtains, table carpets, etc.
-
Infrared remote control (speciic types only)
With the infrared remote control, you can set the suction power to one
of 5 different suction power settings.
When you switch on the appliance, it always starts operating at the
-
highest suction power setting.
To reduce the suction power by one setting, press the - button.
-
To increase the suction power by one setting, press the + button.
Suction power knob (speciic types only)
During vacuum cleaning, you can adjust the suction power with
-
the suction power knob on top of the appliance
pausing during use
If you want to pause for a moment, insert the ridge on the nozzle
1
into the parking slot to park the tube in a convenient position.
If the appliance is equipped with an infrared remote control (speciic
2
types only), press the standby button to switch off the vacuum
cleaner temporarily, for instance when you have to move some
furniture.
To continue vacuum cleaning, press the standby button again. The
3
appliance then starts operating at the previously selected suction
power setting again.
English
13