To clean carpets, push the rocker switch again.
The brush strip disappears into the nozzle housing.
,
Remote control operation (specific types only)
-
The remote control has three buttons with which you operate the
vacuum cleaner. The light flashes when you press a button on the
control panel.
Note: The light does not light up when the batteries are empty. In that case,
replace the batteries (see chapter 'Replacement').
using the appliance
1
Pull the cord out of the appliance and put the mains plug in the wall
socket.
Press the on/off button on top of the appliance to switch on the
appliance.
Tip: To avoid bending your back, press the on/off button with your foot.
If you want to park the tube for a moment during vacuum cleaning,
insert the ridge on the nozzle into the parking slot.
To ensure stable parking of the telescopic tube, adjust the tube to
the shortest length.
5
To switch off the appliance, press the on/off button on top of the
appliance or the on/off/standby button on the remote control.
Downloaded from www.vandenborre.be
EnglISh
1