Setting The Date And Time; Operating Procedure - Olympus C-1 Anleitung

í
Setting the Date and
Time

Operating Procedure

1.
Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
2.
Press the OK/menu button.
¼ The playback mode menu 1/3 is displayed on
the monitor.
3.
Press the or
display the menu 3/3 and select
4.
Display the "Y—M—D" menu by pressing
the or arrow pad key.
5.
Select one of the following date/time display
formats by pressing the
key.
Y—M—D (Year·Month·Day)
M—D—Y (Month·Day·Year)
D—M—Y (Day·Month·Year)
Then press the
¼ The cursor moves to the figure setting field.
6.
Set the first figure by pressing the
arrow pad key, and then press the
pad key.
¼ The cursor moves to the next figure.
7.
Repeat the above steps to set the hour and
minutes.
8.
When the actual time reaches zero seconds,
press the OK/menu button.
¼ The date and time are set and the screen
returns to the playback mode menu 3/3.
arrow pad key to
.
or arrow pad
arrow pad key.
or
arrow
OK/menu button
Monitor button
1 /3
SELECT
Playback mode menu 1/3 screen
Arrow pad
3/3
SELECT
Playback mode menu 3/3 screen
Y
SELECT SELECT
Date/time setup screen
SELECT
Date/time setup screen
9
NO
OFF
NO
NO
SET OK
END
OK
M D
END SET OK OK
SET
OK