Erasing Pictures (One-Frame Erase) - Olympus C-1 Anleitung

í
Erasing Pictures
You can increase the number of images
remaining on a card by erasing
unnecessary images.
Operating Procedure
1.
Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
2.
Display the frame to erase by pressing
the or arrow pad key.
(The frame can also be selected even when the 4-split or
9-split display is selected.)
3.
Press the OK/menu button.
¼ The monitor shows the playback mode menu 1/3.
4.
Select by pressing the
5.
Select "YES" by pressing the
6.
Press the OK/menu button.
¼ The selected image is erased.
The orange lamp on the right of the viewfinder blinks
during erasure.
To cancel single-frame erasure:
Select "NO" and press the
(One-Frame Erase)
OK/menu button
Arrow pad
or arrow pad key.
or arrow pad key.
OK/menu button.
Monitor button
1 /3
NO
OFF
NO
NO
SELECT SET
1 /3
SELECT SET
Playback mode menu 1/3 screen
1 /3
SELECT SET
Playback mode menu 1/3 screen
27
OK
NO
OFF
NO
NO
OK
YES
OFF
NO
NO
OK