Preparing The Camera; Setting The Date And Time - Olympus FE-45 Bedienungsanleitung

● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please
read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual
in a safe place for future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important
photographs.
● In the interest of continually improving our products, Olympus reserves the right to update or modify
information contained in this manual.
● The screen and camera illustrations shown in this manual were produced during the development stages
and may differ from the actual product.Unless otherwise specifi ed, the explanation about these illustrations
is provided for FE-45/X-40.
The camera you purchased is provided with the CD-ROM Instruction Manual. For detailed information
on the features, please refer to the Instruction Manual. Adobe Reader is required to view the Instruction
Manual.

Preparing the Camera

Loading the batteries and the
xD-Picture Card™ (sold separately)
into the camera
Do not insert anything other than an xD-Picture Card
or the microSD Attachment into the camera.
1
3
2
2
Turn off the camera before opening the battery/card
compartment cover.
2 EN
3
Battery/card
compartment cover
1
4

Setting the date and time

The date and time set here are saved to image fi le
names, date prints, and other data.
1
Insert the card straight until it clicks into place.
Do not touch the contact area directly.
1
2
Press the n button to turn on the
camera.
●
The date and time setting screen is displayed
when the date and time are not set.
Notch
Contact area