Varying The Image Brightness (Exposure Compensation) - Olympus C-1 Anleitung

í
Varying the Image Brightness
Although the camera's exposure is set automatically, you can vary it to change the
image brightness in the range of ±2 stops (to 4-times brighter or 1/4-times darker
image) in 0.5-stop steps.
Operating Procedure
1.
Check that the lens barrier is open.
2.
Press the OK/menu button.
¼ The monitor shows the shooting mode
menu 1/3.
3.
Select by pressing the
arrow pad key.
4.
Select a + value (to brighten image) or – value (to
darken image) by pressing the
5.
Press the OK/menu button.
¼ The camera returns to the shooting mode and the
monitor shows the corrected exposure value.
6.
Press the shutter button.
¼ Images can be shot successively while maintaining the
corrected exposure value.
7.
Turn the camera off.
¼ The exposure value is reset to ±0 (no correction).
The exposure compensation value on the monitor goes
out.
(Exposure Compensation)
OK/menu button
Arrow pad
or
or arrow pad key.
1 /3
AUTO
OFF
OFF
OFF
SELECT END
OK
Shooting mode menu 1/3 screen
2 /3
HQ
AUTO
ON
SELECT END
Shooting mode menu 2/3 screen
2 /3
+ 1.5
HQ
AUTO
ON
SELECT END
Shooting mode menu 2/3 screen
Corrected exposure value
21
OK
OK