Using The Flash - Olympus C-1 Anleitung

16
í

Using the Flash

The flash has been designed to fire automatically
when shooting under low light or against strong
back light. You can change this flash mode
according to different shooting situations.
Operating Procedure
1.
Check that the lens barrier is open.
2.
Press the
¼ The monitor shows the shooting mode menu 1/3.
3.
Select by pressing the
4.
Each time you press the
flash mode is switched in the sequence:
Auto-Flash[
Fill-In Flash[
Select one of these modes.
5.
Press the
¼ The flash mode is set and the shooting screen re-
appears. Now you can shoot images with the selected
flash mode.
Note..........................................................
¼
can also be displayed by simply pressing the
arrow pad key when the lens barrier is open. The
flash mark is inscribed on the left of the
key.
Using the Flash Modes
Auto-Flash
AUTO
The flash fires automatically in low light or back light
conditions.To shoot a subject with back light, position the
AF target mark (
Red-Eye Reduction Flash
The light from the flash may make the subject' s
eyes appear red in pictures. This mode reduces
this phenomenon.
OK/menu button.
or
or
Red-Eye Reduction Flash[
Night Scene[
OK/menu button.
) over the subject in the viewfinder.
OK/menu button
Arrow pad
arrow pad key.
arrow pad key, the
Flash Off.
arrow pad
Fill-in Flash
Use this mode to fire the flash with every image.
Night Scene
Use this mode when shooting a subject against a
night background.
Flash Off
Use this mode for shooting in locations where
flashes are prohibited (such as a museum).
1 /3
AUTO
OFF
OFF
OFF
SELECT END OK
Shooting mode menu 1/3 screen
1 /3
AUTO
OFF
OFF
OFF
SELECT END
Shooting mode menu 1/3 screen
Red-Eye Reduction Flash
SHQ
AUTO
OK