One-Frame Erase - Olympus C-1400L Bedienungsanleitung

: E R A S E
G O
C A N C E L
104
7
3 4 5
6 7 8
9 1 0 1 1
7
E

ONE-FRAME ERASE

You can delete pictures you do not want.
1
Display the picture you want to delete. In the Index-Play
mode, place the indicator (the red frame number) on the
picture you want to delete.
2
Press the Erase button. The display above appears.
3
Press the OK button to erase the selected picture.
● "ERASING" on a blue screen appears while erasing. The
previous picture appears when it is complete.
● See page 112 for performing Erase All.
Caution:
◆ Never open the Card compartment cover, eject the
card, remove the batteries, or disconnect the AC
adaptor while erasing pictures. It may destroy the
data in the card.
◆ Do not press the Erase mode button while an image
is being loaded onto the LCD.
Note:
◆ When the write-protect adhesive seal is placed on
the card or the picture is protected from other
cameras or PCs, the Card error mark on the control
panel blinks, and One-Frame erase is not engaged.
◆ The erasing time varies depending on the condition
of the SmartMedia.