Bosch GSA 800 PE Bedienungsanleitung Seite 8

Product Specification
Power Sabre Saw
Part number
Rated power
Output power
Stroke rate at no load
Tool holder
Orbital action
Stroke length
Cutting ability
Weight
Safety class
Noise/Vibration Information
Measured values
EN 50 144.
The A-weighted noise levels of the machine are typ-
ically: Sound pressure level: 86 dB (A); sound power
level: 99 dB (A).
Wear hearing protection!
The weighted acceleration is typically 4,5 m/s
Machine Elements
1 Saw blade
2 Base plate
3 SDS slider for releasing the saw blade
4 Ventilation slots
5 Knob for orbital action
6 Locking button for on/off switch
7 On/Off switch
8 Knob for stroke rate selection
Not all of the accessories illustrated or described are
included as standard delivery.
Intended Use
The machine is intended for sawing, filing, brushing
and polishing of wood, plastic, metal and building
materials while resting firmly against the workpiece.
It is suitable for straight and curved cuts as well as for
flush cutting. The saw blade recommendations are to
be observed.
10
GSA 800 PE
0 601 641 7..
800 W
495 W
500 - 2600 RPM
SDS
4 Stages
28 mm
220 mm
Approx. 3.4 kg
/ II
determined according
GB
to
2
.
Always direct the cable to the rear away from the
machine.
Before each use of the machine, check the cable
and plug. If damage is detected, do not use the
machine. Have repairs performed only by a quali-
fied technician. Never open the machine yourself.
Connect machines that are used in the open via a
fault current (FI) circuit breaker with a triggering
current of 30 mA maximum. Use only extension
cables that are intended for outdoor use and are
protected against splash water.
Insert the mains plug only when the machine is
switched off.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Do not work with materials containing asbestos.
Use only sharp, flawless saw blades. Replace im-
mediately cracked, bent or dull saw blades.
During cutting, the base plate 2 must firmly rest on
the working material.
The cutting path must be free of obstacles both
above and blow.
Bosch can assure flawless functioning of the ma-
chine only when original accessories are used.
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed. In addition, the general
safety instructions in the enclosed
booklet must be followed. Before
using for the first time, ask for a
practical demonstration.
If the cable is damaged or cut through
while working, do not touch the cable
but immediately pull the mains plug.
Never use the machine with a dam-
aged cable.
Wear safety glasses,
gloves and sturdy shoes.
protective