Camera Reset; Lens Adjustment - Instar In-8015 Bedienungsanleitung

8. Camera Reset

In order to reset your camera, please press the
small reset button at the back of your camera
for 15-20 seconds. You will hear the confir-
mation sound after you release the button.
After the reset, the camera will restart, which
can take up to 60 seconds, and all data in the
camera will be set back to factory defaults.
Therefore, please use a network cable or WPS
to reconnect the camera to your network. For
more information on how to install your cam-
era again, please visit: http://install.instar.com.
Once you connect the camera to the network,
use the INSTAR Camera Tool to find out the
camera's IP address and open the camera's
WebUI to start configurating your camera
again.

9. Lens Adjustment

The IN-8015 Full HD standard lens has a depth of field (also focus range) that is
adjusted to a distance of approx. 5 - 10m. In case your area of interest is out of
focus, you will have to adjust the lens accordingly.
Lens Tool
Fig.1 & 2:
Open the WebUI and check the live video. Turn the lens, using the lens focal tool
(part of the delivery content) until your area of interest is in focus. If you turn the
lens clock-wise, the plane of focus moves away from the camera's image sensor,
and if you turn it counter-clock-wise, the plane of focus moves towards it.
Go to http://install.instar.com
Fig. 1
Press 15-20s
to reset camera
Fig. 2
10-EN