Seite 1
- Alarmbenachrichtigung per Email, Push (Textmitteilung) und / oder Alarmserver - Speicherung von Bildern, Videos und / oder Fotoserien per FTP - Internetzugriff von fast überall dank integriertem DDNS und P2P - Sichere Archivierung der Alarmvideos in der INSTAR Cloud (optional)
Seite 1
- Alarmbenachrichtigung per Email, Push (Textmitteilung) und / oder Alarmserver - Speicherung von Bildern, Videos und / oder Fotoserien per FTP - Internetzugriff von fast überall dank integriertem DDNS und P2P - Sichere Archivierung der Alarmvideos in der INSTAR Cloud (optional)
1. Vorstellung der Kamera Die IN-6001HD ist die kleinste der HD-Innenkamera von INSTAR. Durch das ca. 90° Weitwinkelobjektiv haben Sie den kompletten Raum im Blick, sofern die Kamera in der Ecke des Raumes montiert wird. Das eingebautes Mikrofon und der Lautsprecher ermöglichen Ihnen zudem die 2-Wege-Audiokommunikation.
Benutzen Sie die Kamera bitte nicht für einen anderen als den vorgesehenen Zweck. • Installieren Sie das Gerät bitte nicht in der Nähe von leicht entzündlichen Ge- genständen. • Der Hersteller INSTAR haftet für keinerlei Schäden, die durch Zubehör oder Firmware von Drittanbietern entstehen. 3-DE Gehen Sie auf http://install.instar.de...
Kostenfreier Point-2-Point-Zugriff mit InstarVision, unterstüzt IPv6 DDNS Kostenfreie DDNS-Adresse für die Verbindung über das Internet Cloud Opt. Speicherung / Verwaltung der Alarmvideos in der INSTAR Cloud FTP-Upload Übertragung von Alarmbildern / Videos per FTP WiFi-Protected-Setup (WPS) zur einfachen WLAN-Einrichtung WLAN / WiFi 2,4Ghz WLAN, IEEE 802.11b/g/n und WPA/WPA2-Verschlüsselung...
Betrieb verbunden oder Betrieb per WLAN Blinkt langsam LAN-Verbindung Blinkt schnell WLAN-Verbindung Datenübertragung per LAN Firmware-Update Kein Netzwerkkabel Netzwerkkabel ist läuft oder LED ist verbunden oder Be- nicht richtig ver- deaktiviert trieb per WLAN bunden 6-DE Gehen Sie auf http://install.instar.de...
Bitte öffnen Sie den Webbrowser und gehen Sie auf: http://install.instar.de um den Kamera-Installations-Assistenten zu öffnen. Schritt 2. Wählen Sie Ihre Sprache und das Kameramodell IN-6001HD Schritt 3. Entscheiden Sie, auf welche Art Sie sich für die Ersteinrichtung verbinden möchten: a) Verbindung per LAN-Kabel (empfohlen)
Weboberfläche (WebUI): Sie können die Weboberfläche in jedem aktuellen Webbrowser öffnen. Nutzen Sie einfach das INSTAR Camera Tool, um die IP-Adresse der Kamera zu finden und diese im Webbrowser zu öffnen. Die WebUI erlaubt es Ihnen, die Kamera nach Ihren Wünschen zu konfigurieren.
LTE / mobiler Verbindung testen. Beachten Sie bitte, dass eine Portweiterleitung nur bei einem öffentlichen IPv4-Internetanschluss funktioniert. Für Informationen zur Portweiterleitung bei Ihrem Router und dem DDNS-Service im Allgemeinen schauen Sie bitte auf: http://remote.instar.de 9-DE Gehen Sie auf http://install.instar.de...
Adresse der Kamera zu finden und öffnen Sie die WebUI zur neuen Einrichtung. 9. Objektivjustage Das Objektiv der IN-6001HD hat eine Tiefenschärfe (auch Schärfentiefe gen- annt), die werksseitig auf ca. 5-10m eingestellt wurde. Sofern der Bereich, den Sie überwachen möchten, unscharf ist, müssten Sie das Objektiv justieren.
Für die Installation können Sie sich auch unsere Videoanleitungen anschauen, in denen wir Portweiterleitung, FTP-Übertragung, Bewegungserkennung und vieles mehr erklären. Einfach auf YouTube nach INSTARTV suchen oder auf: https://www.youtube.com/INSTARTV 10.4. Wiki, Kundenforum & Social Media INSTAR bietet ein ausführliches Wiki, Kundenforum und einen Facebook Kanal. https://wiki.instar.de https://forum.instar.de https://www.facebook.com/instar.deutschland 11-DE...
Tage unter Die INSTAR Cloud kostet nur etwa 1/3 von dem, was andere Anbieter verlangen. Wenn man mit einer Speichereinheit von 10GB für eine Kamera plant (es lassen sich ca. 5000 Alarm-Events auf 10GB speichern), sparen Sie im Vergleich sogar bis zu ~70% an Kosten.
Wenn Sie unseren Service telefonisch kontaktieren, halten Sie bitte die Modell- bezeichnung und Seriennummer Ihres Produktes bereit. Möchten Sie Ihr Produkt einsenden, dann kontaktieren Sie bitte support@instar.de, um eine RMA Num- mer zu beantragen. Mit dieser RMA können Sie dann das Gerät zur Reparatur einsenden.
Seite 17
- Alarm notifications by email, push and / or to an alarm server - Supports FTP upload of alarm images, videos and / or photo series - Access through the internet from almost anywhere thanks to DDNS and P2P - Supports secured video upload to the INSTAR Cloud (optional)
Seite 18
6. Smartphone Apps 8-EN 7. Remote Access 9-EN 8. Camera Reset 10-EN 9. Lens Adjustment 10-EN 10. Online Material 11-EN 11. INSTAR Cloud 12-EN 12. Technical Data 13-EN 13. Warranty & Disposal 14-EN 14. Legal Information 15-EN 1-EN Go to http://install.instar.com...
1. Camera Introduction The IN-6001HD is the smallest indoor HD IP camera from INSTAR. Thanks to the 90 degree wide angle lens, the camera can be mounted in the corner of a room in order to see everything inside the room. A built-in microphone and speaker also allow a 2-way audio intercom.
Don’t use the camera for any other purpose than it is made for. • Never install the device near explosive or flammable substances. • INSTAR does not give any warranty, if you use any third party firmware. 3-EN Go to http://install.instar.com...
DDNS Free DDNS address to connect to your camera via the internet Cloud Optional upload and managment of alarm videos in the INSTAR Cloud FTP Upload Upload alarm images / videos to an FTP server Use WiFi Protected Setup (WPS) to easily establish a WiFi connection WiFi 2.4Ghz WiFi with IEEE 802.11b/g/n and WPA/WPA2 encryption...
4. Camera Structure 4.1. Delivery Content 4.2. Camera Structure DC 5V Modell Nr: IN-6001HD 100-240VAC / 50-60Hz / 5VDC - 1.5A P2P UID: FAP99MR28WYRBN6MSR21 Mac LAN: 10D1DCXXXXXX SerienNr: 600100001 Reset 5-EN Go to http://install.instar.com...
Seite 23
WiFi mode Slow Flashing LAN connection Fast Flashing WiFi connection Data transfer through LAN Firmware update No network cable Network cable is not in process or connected or in connected correctly LED is turned off WiFi mode 6-EN Go to http://install.instar.com...
Step 1. Please open the web browser and go to: http://install.instar.com Camera Installation Guide. to open the Step 2. Choose your language and camera model IN-6001HD Step 3. Select the type of network connection: a) Connection via LAN cable (recommended) b) Connection directly with WiFi via WPS Step 4.
Web User Interface (WebUI): You can open the WebUI using a modern web browser on your computer. You only need to use the INSTAR Camera Tool to search for your camera IP address and then open it inside your default web browser.
LTE / data connection. Please consider that port forwarding only works if your router has a public IPv4 address. For detailed description to port forwarding on your router model and DDNS Service in general, please refer to: http://remote.instar.com 9-EN Go to http://install.instar.com...
9. Lens Adjustment The IN-6001HD standard lens has a depth of field (also focus range) that is ad- justed to a distance of approx. 5-10m. In case your area of interest is out of focus, you will have to adjust the lens accordingly.
10.2. Firmware Update INSTAR cameras will be provided with free firmware updates. Open the WebUI and navigate to System -> Update, to check if there is a new update available for your camera model. You can then download and install the latest firmware directly through the WebUI.
What is the INSTAR Cloud? The INSTAR Cloud is a purely optional and paid service to backup your record- https://cloud.instar.de. ings. Try the INSTAR Cloud free of charge for 30 days at The INSTAR Cloud costs only about 1/3 of what other cloud platforms demand.
5V DC 1.5A (110-240V), 1.35mm / 3.5mm (out) Power Consumption max. 8W (in normal operation 4W) Operating Temperature - 5°C to 55°C Requirements CPU / Graphic Card Dual Core (min. 2Ghz) / 256MB+ Graphic Card Bandwidth min. 256kbs per camera 13-EN Go to http://install.instar.com...
13. Warranty & Disposal 13.1. Warranty INSTAR offers a 2-year warranty on its products. During this period you can send in your camera for free repair. This excludes cameras installed with cus- tom-made or 3rd party Firmware and WebUIs which have not been approved by INSTAR.