Inhaltsverzeichnis
Werbung
ENGLISH
Before Requesting Service
Power Supply
Symptom
¡The Ni-Cd Battery Pack (optional) is not being
No charging
used.
¡The Camera and Station are not docked
properly.
No power.
¡The batteries have run down.
¡The batteries have not been inserted the right
way round.
¡The AC Adaptor (optional) has not been
connected properly.
Power is supplied but
¡The Ni-Cd Battery Pack (optional) is not
shuts off immediately.
surfficiently charged.
¡The batteries have run down.
¡The batteries have come to the end of their
service life.
¡The Camera is being used in a cold place.
Taking Pictures
Power shuts itself off.
¡The auto power-off function has been activated.
¡The POWER Switch is not at the "REC" position.
No shooting even
when SHTR Button is
¡All the frames which can be shot have been
pressed.
shot.
¡BRIGHT (brightness) has not been adjusted.
LCD Screen display or
image is not clear.
¡Something is pressing down on the LCD Screen.
¡The fluorescent tube is at end of its service life.
No focusing.
¡The NORMAL/MACRO1/MACRO2 Switch is set
to the "MACRO1 (or MACRO2)" position.
Playback
No playback.
¡No images have been recorded.
¡The POWER Switch is not at the "PLAY"
position.
¡The CompactFlash Card on which images were
shot is not inserted.
¡All images recorded on the CompactFlash Card
have been deleted.
No automatic
¡Only one image has been recorded.
continuaus play
No playback images
¡The Station and TV set are not connected
displayed on TV.
properly.
¡The TV's input selector has not been set to
"VIDEO."
¡The TV used does not support the NTSC
system.
Cause
-113-
Action
¡Use the Ni-Cd Battery Pack (optional).
¡Ensure that the Camera and Station are docked
properly.
¡Use new batteries or charge the Ni-Cd Battery
Pack (optional).
¡Check out the d and e polarities before
inserting the batteries.
¡Connect it properly.
¡Charge it surfficiently.
¡Use new batteries or charge the Ni-Cd Battery
Pack (optional).
¡Replace them with new ones.
¡Due to their characteristics, alkaline batteries
tend to run down in a short time when they are
used at low temperatures. Use the Ni-Cd Battery
Pack (optional).
¡Press the SHTR Button or, alternatively, return
the POWER Switch to "OFF" position and then
set it to "REC" again.
¡Set the POWER Switch to the "REC" position.
¡Delete those images which are no longer
required.
¡Use the o or p Button to adjust BRIGHT
(brightness).
¡Ensure that nothing presses down on the LCD
Screen.
¡Consult with your dealer.
¡Return the switch to "NORMAL."
¡Nothing can be played back.
¡Set the POWER Switch to the "PLAY" position.
¡Insert the CompactFlash Card on which images
were recorded.
¡Unfortunately, the deleted images cannot be
regenerated.
¡Continuous play is possible when 2 or more
images have been recorded.
¡Connect the Station and TV set properly.
¡Set the TV's input selector to "VIDEO."
¡Playback on a TV supporting a system other
than NTSC is not possible.
Page
24
18
20, 24
20
26
24
20, 24
—
22
38
38
74, 76
58
40
100
50
—
60
28
76
—
64
64
64
Werbung
Inhaltsverzeichnis
