Production Date - Steute Rf Rw Sw868 Montage- Und Anschlussanleitung

RF RW SW868/915/917/922-NET/-ESD
//
Montage- und Anschlussanleitung / Funk-Lagesensor
Mounting and wiring instructions / Wireless tilting sensor
English
Portable batteries
The integrated portable batteries have the same lifetime as the device
itself and cannot be changed. Before initial start-up and teaching-in
of the sensor, activate the device as follows: remove the battery seal.
Observe the maximum ambient temperature!
CAUTION
Battery acid. Material damage! Non-observance
may lead to functional impairment. Check porta-
ble batteries regularly for leaking. If the batteries
should leak, do not touch the leaked fluid with bare
hands. Wipe away any leaked fluid thoroughly using
a soft cloth.
Once the battery seal has been removed, the integrated portable bat-
teries have a maximum lifetime of 10 years. This is made possible by
the extremely low-power sleep mode. In sleep mode, power consump-
tion is no higher than battery self-discharge.
Lifetime according to switching frequency
Normal
switching
frequency
Transmission 12x/h
impulses
= total per year 105,000
Lifetime max. 10 yrs
In order to increase battery lifetime, we recommend the following
measures:
- Start operation of new devices immediately, plan stockpiling
of devices.
- Maintain constant operational temperature and humidity (around
20°C and dry).
- Set wake-up signal / status monitoring interval to be as long as
possible (e.g. > 1 x/h).
- Reduce actuation frequency (e.g. < 12 x/h).
- Do not move the device unnecessarily.
- Maintain constant storage temperature and low humidity
(+10 °C ... +20°C, dry).
Maintenance and cleaning
=
DANGER
Live parts. Electrocution hazard! Non-observance
may lead to severe or fatal injuries. Do not attempt
to repair damaged or faulty devices. All replace-
ments must be carried out by qualified staff.
High Extremely
switching high
frequency switching
frequency
1x/min 6x/min
525,000 3,100,000
approx. 9 yrs approx. 4 yrs
5 / 16
=
DANGER
Live parts. Electrocution hazard! Non-observance
may lead to injuries. Do not clean device with water.
Observe certified protection class when cleaning.
We recommend the following regular maintenance steps, especially if
mobility of the device is restricted:
1. Remove all dirt particles.
Clean enclosure on the outside only. Clean enclosure with household
cleaning agents. Do not use compressed air to clean.
Shutdown, storage and disposal
=
CAUTION
Live parts. Electrocution hazard! Non-observance
may lead to injuries. Do not attempt to use a device
which has been disassembled.
=
CAUTION
Moving mechanical parts. Crushing hazard!
Non-observance may lead to injuries. Remove
holder with care.
Avoid overlong storage of the device.
- Observe national, local and legal regulations concerning disposal.
- Recycle each material separately. Dispose of possibly contained
portable batteries correctly.
N.B.
We reserve the right to make design changes in line with technological
progress. Modifications to existing switches are not permitted. steute
accepts no liability for recommendations given or implied by these
instructions for use. No new guarantee, warranty or liability claims
beyond the steute general terms and conditions can be inferred from
these instructions for use.
Herstellungsdatum 2E3 =>

Production date

E 2019 F 2020
H 2022 I 2023
KW 23 / 2019
CW 23 / 2019
G 2021
J 2024