Charging The Battery - Medion MD 86427 LIFE X47007 Kurzanleitung

Ensure that the contacts on the card are facing downwards.

To remove the battery, remove the cover and take the battery out.

To remove the memory card, press the memory card until you
hear a click in the slot and then let go. The memory card will be
automatically ejected a little from the slot so that you can remove
the card.

Charging the battery


To charge the battery, connect the camcorder to the supplied
charging cradle.

Plug the mains adapter into a 230 V ~ 50 Hz socket and insert the
battery.

When the battery is fully charged the green LED will come on.
Ensure the +/- terminals are correct.
The battery requires approximately six hours to reach full
charge for the first time. The LED is lit red during the charging
procedure. The LED will light up green as soon as the charging
process is complete.
Tips for proper use of batteries can be found in the (safety
instructions / Preventing damage to the battery).
The camcorder enables you to charge the battery while it is in the
device. To do this, simply connect the camcorder to a PC via the USB
cable. When switched off the camcorder will now begin to recharge
the battery.
The PC must remain operational.
14