Important Notes - Rehau RAUTOOL A-LIGHT2 KOMBI Bedienungsanleitung / Technische Information

IMPORTANT NOTES

Compression sleeve
Failure to observe these instructions may result in material damage
and/or personal injury!
Attention:
Do not touch moving parts (risk of
trapping fingers!
When using an expander bit, check
to make sure that the seating (fully
inside the jaws) and clamping action
of the bit in the jaws are correct (to
avoid falling out).
Failure to observe these instructions may result in material damage
Attention:
Do not expand the pipe under ben-
ding stress!
Expanding tool and pipe axis must
be identical in the expansion area
(approx. three compression sleeve
lengths): if necessary, readjust the
pipe by bending.
Never work with a damaged
expander head as this will damage
the pipe! Replacements are available
from your dealer or from the REHAU
sales office.
30
Always apply clamping jaws or
jointing technique at right angles,
making sure they completely contact
the entire surface.
Make sure the fitting is correctly
seated in the tool. Applying the tool
to the wrong fitting collar will
overcompress the joint!
As a matter of principle, always
insert the expanding tool into the
pipe up to the stop.
Do not tilt the expanding tool!
Regularly grease the expander taper
(tube of lubricant included). To avoid
excess grease entering the pipe, do
not grease the taper too much.
Attention:
Do not grease the expander seg-
ments that are in contact with the
pipe!