Product Description; Cooking Surface Layout; Control Knob; Residual Heat - AEG HK614000H Benutzerinformation

18 www.aeg.com

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

1

3.2 Control knob

Symbol
0
- 3

4. DAILY USE

WARNING!
Refer to Safety chapters.

4.1 Before first use

Put cookware containing water on each
cooking zone, set the maximum position
and operate the hob for 10 min. This is to
burn off the residue in the appliance.
After that, operate the hob at minimum
position for 20 min. During this period,
an odour and smoke can occur. This is
normal. Make sure that the airflow is
sufficient.
4.2 Using the rapid hot plate
A red dot in the middle of the plate
shows a rapid hot plate. A rapid hot

5. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
1 1
180 mm 180 mm
145 mm 145 mm
3 2
Function
Off position
Heat settings
Cooking zone
1
Control knobs
2
Power indicator
3
1

3.3 Residual heat

WARNING!
There is a risk of burns from
residual heat.
plate heats up faster than usual plates.
The red dots are painted on the plates.
They can deteriorate during use and
even disappear completely after a period
of time. It does not have an effect on the
performance of the hob.

4.3 The heat setting

To set or change the heat setting turn
the knob to the correct heat setting. To
deactivate turn the knob to off position.
Power indicator activates when one or
more cooking zones are activated. When
you deactivate the cooking zones the
indicator deactivates.