SXT-Scooters Buddy V2 eKFV Gebrauchsanleitung Seite 49

Mounting the front light
Fig.5
Fig.7
Finally, all you have to do is shrink the tubing over the Pull the pre-
viously connected plug (Fig.9) and heat with a hot-air dryer or care-
fully with a commercially available lighter until it contracts (Fig.10).
Fig.9
49
Before connecting the
two connectors (Fig.5),
pull the supplied heat
shrink tube over one
Fig.6
cable end (Fig.6 - Fig.7),
then you can connect
the two connectors
together (Fig.8).
Fig.8
Fig.10