SXT-Scooters Buddy V2 eKFV Gebrauchsanleitung Seite 45

Before departure
8. do not use the scooter at temperatures below 0°C
9. drive very slowly and carefully or get off the scooter if the road conditions are bad.
10. do not use the scooter on oily or icy surfaces.
11. Please adjust the handlebar height to your height to ensure a safe ride.
12. To avoid damage to the electrical parts of the vehicle, do not drive through deep
puddles of water and do not wash it with water under pressure.
Do not drive in bad weather, such as heavy rain and wind.
14. Do not drive the scooter under the influence of drugs or alcohol.
Before departure
Tire pressure:
The necessary air pressure in the tyres is 2.7 to 3.4 bar.
Mechanical safety check:
Before using the SXT Buddy V2 eKFV: Perform a visual inspection for any loose
screws and other parts. Make sure that everything is in place and that no parts are
missing or worn out. If you are unsure, contact your dealer or technical support
immediately!
Tyres and wheels:
Check your tyres for wear by rotating them on their own axle to inspect them all
around, making sure that they rotate freely and do not block the brakes. If you do,
please contact your dealer or Technical Support!
Check the brakes and all mechanical functions before each ride.
45