Denon AVR-1404 Bedienungsanleitung Seite 22

ENGLISH
(3) DELAY TIME
Use the
(Remote control unit)
(4) D. COMP.
Use the
(Remote control unit)
NOTE: This parameter is displayed during DOLBY DIGITAL playback.
(5) LFE
Use the
(Remote control unit)
NOTE: This parameter is displayed during DOLBY DIGITAL playback.
(6) DEFAULT
To reset the settings to the factory defaults, use the
buttons to display "Yes".
DEFAULT
(Remote control unit)
Press the surround parameter button to switch to the ROOM SIZE, DELAY, EFFECT LEVEL setting.
NOTE: When making parameter settings, the display will return to the regular condition several seconds
after the last button was pressed and the setting will be completed.
22
(left) and (right) buttons to set the delay time.
(Initial)
0ms 30ms 110ms
DELAY 30ms
(left) button (right) button
(left) and (right) buttons to set the D. COMP.
(Initial)
OFF LOW MID
D.COMP. OFF
(left) button
(left) and (right) buttons to set the LFE.
-10dB -5dB
LFE 0dB
(left) button (right) button
YES Y/N NO
Y/N
(left) button (right) button
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
• When turned clockwise
STEREO
VIRTUAL SURROUND
HIGH
• When turned counterclockwise
STEREO
(right) button
VIRTUAL SURROUND
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the SURROUND MODE button then operate the selector.
(Initial)
0dB
(Main unit)
2
(Main unit)
(left) and (right)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB,
VIDEO GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal
switches to a DTS signal, the mode automatically switches to DTS surround.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large".
"small" recreates a small sound field, "large" a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. When the surround mode is set to "VIRTUAL", the effect level
can be set in steps from 1 to 10. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
(Main unit)
DOLBY PRO LOGIC II 5CH STEREO MONO MOVIE
MATRIX VIDEO GAME JAZZ CLUB
DOLBY PRO LOGIC II 5CH STEREO MONO MOVIE
MATRIX VIDEO GAME JAZZ CLUB
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to
set.
• The parameters which can be set differ for the different surround modes. (Refer to
"Surround Modes and Parameters" on page 23.)
1 2 1, 3
ROCK ARENA
ROCK ARENA