Component List - Worx Professional WU651 Handbuch

Component list

1
On/off witch
2
Soft grip handle
3 Cyclonic dust box
4
Latching lever
5
Dust extraction outlet
6 Outer base plate
7 inner base plate
8
Motor housing
9
a: inner spot paper*(See Fig A)
b: Outer ring paper*(See Fig A)
10
Dust extraction adaptor(See Fig E)
* Not all the accessories illustrated or described are included in
standard delivery.
Additional safety instructions for
your sander
1
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
2 Fully unwind cable drum extensions to avoid potential overheating.
3
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
4
Ensure your mains supply voltage is same as indicated on the
rating plate.
5
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
6
Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
7 After long working periods external metal parts and accessories
could be hot.
8
Wear eye protection when operating this tool.
9
if possible, ensure the workpiece is firmly clamped to prevent
movement.
10
Your sander is a hand held tool, do not clamp your finishing sander.
11
Before sanding, check the area is free of nails, screws, etc.
12 Never stop the sander by applying a force to the baseplate.
4