Coalesse Massaud Bedienungsanleitung Seite 11

Arm Cap Replacement
1.
Place the chair on it's back so you can see the
underside of the arm cap.
2.
Use a small hook or a paper clip and insert the end
into the loop of the zipper slider. This will release the
lock on the zipper slider and will allow you to unzip the
zipper, (or use scissors to cut it off). Repeat for the other
arm cap.
3.
Take the new arm cap, and position it so the zipper
starts at the front of the arm and the foam pad is on top
of the aluminum arm. (TIP: Be sure to center the arm
cap on the arm).
4.
Wrap the fabric around the aluminum arm and zip
the arm cap closed.
5.
Use a pair of wire cutters to cut the pull tab off
of the zipper. Repeat for the other arm cap.
2
ZIPPER SLIDER
5
PAPER CLIP
ARM CAP
PULL TAB
Page 11 of 44
7960573 Rev B