Coalesse Massaud Bedienungsanleitung Seite 10

Aluminum Arm Replacement
1.
Position the chair as shown. Locate the 2 recessed
bolts that attach the arm to the chair. Remove these
bolts and set the arm aside.
2.
Align the mounting holes in the new arm with the
holes in the mounting plate on the chair. Install the
new mounting bolts to 135 in-lbs (15 Nm).
Arm Width Adjustment
1.
Position the chair as shown. Locate the 2 recessed
bolts that attach the arm to the chair. Remove these bolts
and set the arm aside.
2.
Use a flat bladed screw driver to remove the black
plastic cap to expose an additional arm mounting hole.
3.
Align the arm with the outermost mounting
hole and install the new mounting bolts
to 135 in-lbs (15 Nm).
4.
Repeat these steps for the other arm.
BOLT
BLACK
PLASTIC CAP
Arm Width Adjustment
Page 10 of 44
7960573 Rev B