Herunterladen Diese Seite drucken

RICOO SE2544 Montageanleitung Seite 32

Fernbedienbare motorisierte wandhalterung für bildschirm

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The Remote Control Operating Instructions
10
LEARN MODE operation instructions 2/2
LEARN MODE instructions as shown below. As an example with the key
STEP1: Press and hold
then press
. The buzzer will sound once, the red LED light on the IR receiver will stay on, then the
LEARN MODE will be entered.
STEP2: If LEARN
the red LED light on the IR receiver will change from being steady to a slow flash.
STEP3: Aim the TV remote at the IR receiver, and press the button on the TV remote that you need to set as
the function of
button until the buzzer sounds three times. the red LED light on the IR receiver will
change from slow flash to a fast flash.
STEP4: Press
button on the matched remote control until the buzzer sounds four times. The
red LED light on the IR receiver will turn off.
sounds once, then a LEARN failure.(The TV remote won't support the LEARNING function).
(Please follow step1 through step4 in turn if the user need to LEARN more buttons)
Learn "Power" button on the TV remote:
Press and hold
for 5 seconds until LED light on the matched remote control stays on , and then press
The buzzer will sound once, the red LED light on the IR receiver will stay on, then press and hold
on the matched remote control until the buzzer sounds twice, then release the
light on the IR receiver will change from being steady to a slow flash.
Aim the TV remote at the IR receiver, and press "Power" button. The buzzer will sound three times. The red
LED light on the IR receiver will change from slow flash to a fast flash. Press
remote control until the buzzer sounds four times. The red LED light on the IR receiver will turn off. "Power"
button will be LEARNED successfully. If press "power" button, the TV wall mount will automatically reset.
Note: When there is no activity for over 20 seconds in any step .TV remote will automatically exit from the
LEARN MODE.
Done
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your distributor if you have any questions.
for 5 seconds until LED light on the matched remote control stays on, and
, please press
on the matched remote control until the buzzer sounds twice,
button will be LEARNED successfully. If the buzzer only
15
:
button
button. The red LED
button on the matched
Deutsch
.
English

Werbung

loading