Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
For wood stud wall mounting
a
Mounting direction 2: reverse For swinging out from left
!
55mm
55mm
(2.2")
(2.2")
ø 4.5mm
(ø 3/16")
1
B
3
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the equipment and all
attached hardware and components.
H
√
X
X
4
WARNING
Find and mark the exact
location of mounting holes
2
Tighten the screw leaving a 7mm space from
the wall.
5
Drill pilot holes
Screw the wall
mount onto
the wall
W-A(x1)
7mm
W-C
English
Deutsch
W-A
Werbung
