Seite 2
Liebe Kundin, lieber Kunde, S0544 wir freuen uns, dass Sie sich für ein Produkt der Marke "RICOO" entschieden haben Manchmal trotz aller Bemühungen unsererseits Ihnen ein qualitativ hochwertiges Produkt zu liefern, kann es vorkommen, dass einmal ein Zubehörteil fehlt oder ein Teil während des Transports beschädigt wird...
Lieferumfang WICHTIG: Stellen Sie vor der Montage sicher, dass alle Teile welche hier aufgeführt sind, bei der Lieferung dabei sind. Sollten Teile fehlen oder defekt sein, kontaktieren Sie Ihren Händler. Grundgerüst Horizontalbalken oben Horizontalbalken unten (x1) (x1) (x1) Montageschiene Plastikstopfen 1 Plastikstopfen 2 Stosspolster (x2)
Seite 4
1a. Befestigung an der Holzbalkenwand 55mm 55mm (2.2") (2.2") ø 4.5mm (ø 3/16") Mit ausgestanztem Pfeil nach oben Holzbalken mit Balkenfinder finden und die Montagelöcher markieren. Montagelöcher bohren. √ Wandplatte an die Wand anschrauben. Beachten: keine Scheibe bei diesem Loch erforderlich! WARNUNG •...
Seite 5
1b. Befestigung an der Massivbetonwand 60mm 60mm (2.4") (2.4") ø 10mm (ø 3/8") Mit ausgestanztem Pfeil nach oben Achtung: Mitgelieferte Dübel sind nur für Massivbetonwände geeignet! Montagelöcher markieren. Montagelöcher bohren. √ Wandplatte an die Wand anschrauben. Beachten: keine Scheibe bei diesem Loch erforderlich! WARNUNG Installateure müssen sicher stellen, dass die Anbaufläche das Gesamtgewicht von diesem Produkt inkl.
2. Montage der dekorativen Abdeckungen Montieren Sie die dekorativen Abdeckungen entlang der Wandplatte. Achten Sie darauf, dass diese auf der Wandplatte einrasten. 3. Zusammenbau der Frontplatte Deutsch English...
4. Anbringung der Frontplatte an den Bildschirm Oberseite des TVs 4-1 Für Bildschirme mit gewölbter Rückseite oder für den freien Zugang zu den Anschlüssen oder oder oder Deutsch English...
4-2 Für Bildschirme mit flacher Rückseite Beachten: Wählen Sie die zu Ihrem TV passenden Schrauben, Unterlegscheiben und falls erforderlich die Abstandshalter. · Montieren Sie die Montageschienen so nah wie möglich zur Mitte des TV-Gerätes. · Fixieren Sie die Montageschienen mit Hilfe von den dazugehörigen Schrauben. Ziehen Sie alle Schrauben nach.
6. Aufhängung des Bildschirms an die Wandhalterung / das Grundgerüst Den Bildschirm samt Frontplatte von oben einführen. Die obere Schraube an der Frontplatte in die vorgesehene Aussparung an der Frontplattenaufnahme einführen. Beachten: Die Frontplattenaufnahme muss sich zwischen den beiden Plastik- scheiben befinden! Im Anschluss setzten Sie eine Plastikscheibe "K"...
7. Kabelführung Kabelabdeckung Kabelabdeckung • Schließen Sie die Kabel an Ihrem Fernseher an und führen Sie die Kabel durch die Führungsschiene. • Montieren Sie die dekorativen Abdeckungen ACHTUNG: • Auf genügend Kabellockerung achten, damit das Schwenken der Halterung nicht beinträchtigt wird. •...
Seite 11
8. Einstellungen / Ausrichtung Diese Wandhalterung besitzt eine Drehfunktion der Frontplatte. Somit ist der Bildschirm in Horizontaler / Waagerechten um +/-2° drehbar. Dies hat den Vorteil, dass Sie den Bildschirm jederzeit horizontal ausrichten können. Um dies zu ermöglichen müssen die zwei Einstellschrauben an der Frontplatte mittelfest angezogen werden (Schritt 8). Dadurch wird es möglich sein den Bildschirm jederzeit mit den Händen ohne die Schrauben lockern zu müssen und ohne großen Kraftaufwand waagerecht gerade stellen können, was das Ausrichten ohne Extra-Werkzeug ermöglicht.
Seite 12
Fertig. +2° -2° +/-90° 0° +15° Die TV-Halterung kann um 90° geschwenkt, um 0° / +15° geneigt oder um +/-2° gedreht werden. Wartung • Prüfen Sie in regelmäßigen Abständen (mindestens alle drei Monate), ob alle Schrauben an dem Produkt fest angezogen sind.
Seite 13
Horizintally Display back This wall mount supports the following distance between holes: Horizontally min. 200mm - max. 410mm Vertical / Perpendicularly min. 100mm - max. 410mm 25kg 200x100 300x400 S0544 (55lbs) 200x200 400x100 300x100 400x200 300x200 400x300 300x300 400x400 English...
Seite 14
Dear customer, S0544 we are pleased that you have decided for a product of the brand "RICOO" Sometimes, despite our efforts to provide you with a high-quality product, it may happen that an accessory is missing or a part is damaged during transport .
Seite 15
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. Arm assembly Bottom horizontal bar Top horizontal bar (x1) (x1) (x1)
Seite 16
1a. For Wood Stud Wall Mounting 55mm (2.2") ø 4.5mm (ø 3/16") With the arrow pointing up. Find and mark the exact location of mounting holes Drill pilot holes √ Screw the wall mount onto the wall Note: no washer in this hole required! WARNING •...
Seite 17
1b. For Solid Brick and Concrete Mounting 60mm 60mm (2.4") (2.4") ø 10mm (ø 3/8") With the arrow pointing up. Warning: Supplied plastic anchors are only suitable for solid concrete walls! Mark the exact location of mounting holes Drill pilot holes √...
Seite 18
2. Installing the Decorative Covers Install the decorative covers along the wall plate rail until they fit snuggly onto the wall plate. 3. Assembling the front panel English Deutsch...
Seite 19
4. Attaching the Adapter Brackets on the display Top of the display 4-1 For Recessed Back Screens or to Access A/V Inputs oder oder oder English Deutsch...
Seite 20
4-2 For Flat Back Screens Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. · Position the adapter brackets as close as possible to the center of the display. · Screw the adapter brackets onto the display. Tighten all screws but do not over tighten.
Seite 21
6. Hooking the Display onto the Wall Mount Insert the display along with front panel from above. Insert the top screw on the front panel into the recess provided on the wall mount. Note: The front panel holder must be located between the two plastic washers! Next put on the bottom screw a plastic washer "K"...
7. Cable Management Cable cover Cable cover • Connect the cables to your display and route along the arms. • Fit the cable covers into the rail to hold the cables. Note: • Leave slack in the cables for cantilever arm movement. •...
8. Adjustment This Wall Bracket has a rotation function of front plate. Therefore the screen is turnable ±2° horizontally. This is an advantage for the adjustment of the screen in the horizontal position at all time. To permit this, you have to screw the setting screws at medium strength (Step 8). Thereby it will be possible to adjust the screen in the horizontal position without unscrewing the screw or a big effort at all time, which is possible without extra-tools.
Seite 24
Done +2° -2° +/-90° 0° +15° Adjust to the desired position or tilt. Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions. Done English Deutsch...