Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Placing the IR Receiver
9
E
Do not plug into the power outlet until it is ready to be operated.
Peel the backing paper. Place the IR receiver into desired position.
Make sure nothing will obstruct the transmission from where the TV will be viewed.
The Remote Control Operating Instructions
10
Remote control operation instructions
remote control
Do not open the electrical cover please.
STEP 1: When powered, the buzzer sounds once beep, TV wall
mount will be in standby state.
STEP 2: Forward and reverse installation choices. NOTE:
There are forward and reverse installations for the wall mount:
- Nr. 1: normal installation
- Nr. 2: reverse installation
If it is the forward installation, the STEP 2 is not
required; If it is the reverse installation, Press and hold
5 seconds until the buzzer sounds twice beep beep, Remote
control is now successfully set.
STEP 3: Press OK to return the TV wall mount flat against the
wall and hear one beep from the buzzer, the system will then
enter a working condition.
STEP 4: Follow the Key function instructions below to operate.
13
F
Deutsch
for
English
Werbung
