General Features; Connecting Your Dsb-9601C - Samsung DSB-9601C Gebrauchsanweisung

GENERAL FEATURES

1. USER SECTION
4000 PROGRAMMABLE CHANNELS
SOFTWARE DOWNLOAD VIA SATELLITE & PC
ADVANCED ELECTRONIC PROGRAM GUIDE
MULTI LANGUAGE SUPPORTED FOR OSD
SUBTITLE & TELETEXT(OSD & VBI)SUPPORTED
WITH MULTI LANGUAGE
FULL FUNCTION INFRARED REMOTE CONTROL UNIT
AUTO AND MANUAL SCAN FACILITY
CHANNEL ORGANIZING(PROGRAMMABLE)
LOW POWER CONSUMPTION
AUTO UPDATED EPG
PVR FUNCTION
2. TUNER SECTION
950~2150 MHz WIDE BAND TUNER
IF OUTPUT WITH DC PASS LOOP FOR ANALOG RECEIVER
SUPPORTING DiSEqC 1.2 VERSION
13V/18V SWITCHING
22KHz CONTINUOUS TONE CONTROL
2 TUNER
3. VIDEO SECTION
DVB-S COMPLIANT
MPEG-2 VIDEO(MP@ML)
2~45 MS/s SYMBOL RATE
COMPATIBLE FOR BOTH SCPC/MCPC
SUPPORTS ASPECT RATIO 4:3(NORMAL) AND
16:9(WIDE SCREEN)
MODULATOR OUTPUT
S-VHS, 2SCART, 1RCA
4. AUDIO SECTION
MPEG 1 AUDIO LAYER I & II AND DOLBY AC3
MONO, DUAL, STEREO AND JOINT STEREO AUDIO MODE
32, 44.1, 48 AND 96 KHz SAMPLING FREQUENCIES
VOLUME CONTROL AND MUTE FUNCTION THROUGH
REMOTE CONTROL UNIT
SPDIF DIGITAL AUDIO OUTPUT
5. PVR SECTION
40 GB HARD DISC
PVR FUNCTION(PLAY, SLOW, SKIP,FF, REW,..)
FILE MANAGEMENT(COPY, CUT, COMBINE, DELETE, MOVE, LOCK,..)
3-FILE PLAY MODE(FULL, MOSIC, PIP)
EPG TIMER RECORDING
TIMESHIFT RECORDING
RECORDING A CHANNEL WHILE WATCHING ANOTHER
CHANNEL SIMUTANEOSLY
ZOOM FUNCTION
GB-6
P E R S O N A L V I D E
CONNECTING YOUR "DSB-9601C"
1. LOCATION OF THE RECEIVER
Your DSB-9601C should be placed under proper ventilation.
Don't put in completely enclosed cabinet that will restrict the flow of air, resulting in
overheating.
The location should be safeguarded from direct sunlight, excess moisture, rough
handling or household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
2. CONNECTING THE RECEIVER WITH DISH SYSTEM
After installing your antenna system, connect the coaxial cable from the LNB of your
antenna to "LNB" terminal marked at the rear panel of the DSB 9601C.
All cable connectors should be finger tightened; do not use any kind of wrench while
tightening connectors. The cable should be 75ohm impedance coaxial twisted at
the end with an "F" type connector.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use four methods;
via SCART cable, RF cable, RCA cable or S-VHS cable. S-VHS provides the better
screen quality.
Connect the RF cable to the terminal marked "TV" at the rear panel of DSB-9601C and
its other end to the TV RF input socket.
In the case of connecting your TV through SCART cable, connect the SCART connector
marked TV to the respective SCART port on the TV.
4. CONNECTING YOUR ANOTHER RECEIVER
To facilitate the user using analog receiver to view analog channels, DSB-9601C has
been provided with a loop through terminal marked as "LOOP".
Connect the coaxial cable from this terminal to the IF input terminal of your analog
receiver. Now by keeping the DSB-9601C in standby, you will be able to tune and view
analog channels from your another receiver.
5. CONNECTING YOUR VCR
To connect a VCR, the DSB-9601C has been provided with SCART at the rear
marked "VCR".
Using a SCART connector, the VCR can be connected to the receiver.
O R E C O R D E R C O M M O N I
GB-7
N T E R F A C E