KERN ALJ Serie Betriebsanleitung Seite 134

10.1 Weighing units (unit1 / unit2)
Weight units which are to be available during the operation can be selected in the
menu. If you have selected different units (unit1 and unit2), the weighing result can
be displayed in two different weight units (unit1 and unit2) simultaneously.
To switch between different values in "unit1" and "unit2" weight units, use PRINT
button.
• For verified balances not all units are available, see chapter 1 "Technical
Specification".
• The device is delivered with the factory setting of "unit1".
Activation of switchable weight units:
 In the weighing mode, press and hold MENU button until the audible signal goes
off. The first menu item, i.e. "unit1" will be displayed.
 Press PRINT to confirm, "Gram" will be displayed.
 Using navigation buttons  , choose the required setting for "unit1".
To go forward, use MENU button.
To go backward, use CAL.
46 ALJ/ALS/PLJ/PLS-BA-e-1944