Herunterladen Diese Seite drucken

Gessi OXYGENE 23491 Anleitung Seite 11

Werbung

Installazione - Installation - Installation - Installation - Instalación
installazione suPPorto soffione
Individuare tutti i componenti del fissaggio, quindi applicare la placchetta alla parete facendo coincidere i
fori con quelli dei tasselli. Fissare con le apposite viti in dotazione. Pre-montare sulla prolunga inferiore i
componenti restanti del fissaggio a parete.
Attenzione! Per evitare di danneggiare la superficie della colonna doccia bloccare temporaneamente il
fissaggio avvitando LEGGERMENTE la vite al supporto della prolunga.
Inserire la prolunga inferiore nel corpo fino a battuta e avvicinarla alla placchetta a muro andando ad avvitare
LEGGERMENTE le viti di fissaggio a parete.
shower head suPPort installation
Find all the components for the fastening and apply the plate to the wall with holes coinciding with those of the
plugs. Fasten with the special screws supplied. Pre-install on the lower extension the remaining components
of wall fastening.
Warning! To avoid damaging the surface of the shower column temporarily block the fastening SLIGHTLY
tightening the screw on the support of the extension.
Insert the lower extension in the body down to the stop and approach it to the wall plate tightening SLIGHTLY
the wall fastening screws.
installation du suPPort de la Pomme
Identifier tous les composants de la fixation, puis appliquer la plaquette à la paroi en faisant coïncider les
trous avec ceux des chevilles. Fixer avec les vis spéciales fournies. Pré-monter sur la rallonge inférieure les
composants restants de la fixation à paroi.
Attention! Pour éviter d'endommager la superficie de la colonne douche bloquer temporairement la fixation en
serrant LÉGÈREMENT la vis sur le support de la rallonge.
Insérer la rallonge inférieure dans le corps jusqu'à la butée et la rapprocher de la plaquette au mur en serrant
LÉGÈREMENT les vis di fixation à la paroi.
installation der stütze für den BrausekoPf
Alle zur Befestigung notwendigen Bestandteile bestimmen, dann das Plättchen an die Wand befestigen und
dafür sorgen, dass seine Löcher mit denen der Dübel zusammenfallen. Mit den serienmäβigen Schrauben
befestigen. Die Restbestandteile der Wandbefestigung auf das untere Ansatzrohr vormontieren.
Achtung! Um die Beschädigung der Duschsäulenoberfläche zu vermeiden, ist die Befestigung vorläufig zu
blockieren, indem die Schraube zur Stütze des Ansatzrohrs LEICHT eingeschraubt wird.
Das untere Ansatzrohr in den Körper bis Anschlag einfügen und es ans Wandplättchen annähren, indem die
Schrauben zur Wandbefestigung LEICHT eingeschraubt werden.
instalación soPorte florón
Individúen todos los componentes de fijación, sucesivamente apliquen la placa a la pared haciendo coincidir
sus huecos con aquellos de los tacos. Fijen con los tornillos correspondientes incluidos en el suministro.
Efectúen el premontaje sobre la alargadera inferior de los demás componentes para la fijación a la pared.
¡Cuidado! Para no dañar la superficie de la columna ducha bloqueen temporáneamente la fijación atornillando
LIGERAMENTE el tornillo al soporte de la alargadera.
Introduzcan la alargadera inferior en el cuerpo hasta el tope y acérquenla a la placa a la pared atornillando
LIGERAMENTE los tornillos de fijación a la pared.
11

Werbung

loading