Faqs - Oventrop Unibox Rtl Betriebsanleitung

"Unibox RTL"

12.3 FAQs

QUESTION
Is it possible to connect two
heating circuits to one "Uni-
box RTL"?
How many m² of temperature
regulation surface can be
connected to the "Unibox
RTL"?
Can the "Unibox RTL" be
operated with an actuator?
Can the "Unibox RTL" be op-
erated with a remote control?
102273580-V02.10.2019
RESPONSE
Yes, use a"Duo connection piece" to connect two heating
circuits of the same length to one "Unibox RTL". Each surface
temperature regulation circuit may have a maximum pipe
length of 80 m, provided you use 16/17 mm pipes.
Illust. 20: Connection scheme of two heating circuits with "Duo
connection piece"
You can connect a surface covering approximately 20 m² per
"Unibox RTL". The pipe length must not exceed 100 m when
using a 17 mm pipe.
No, actuators are suitable for "Uniboxes" with individual room
temperature control only.
No. remote controls are suitable for "Uniboxes" with individual
room temperature control only.
Appendix
37