Maintenance; Removal And Disposal; Removal; Disposal - oventrop Unibox RTL Betriebsanleitung

"Unibox RTL"

10. Maintenance

Regularly check the tightness and function of
the product and its connection points as part of
system maintenance.

11. Removal and disposal

11.1 Removal

Set the handwheel to the mid-position when
removing the cover plate of the "Unibox RTL"
(see 7.4 on page 32).

11.2 Disposal

NOTICE
Risk of environmental pollution
Incorrect disposal (for instance with
standard waste) may lead to environ-
mental damage.
f Dispose of packaging material in
an environmentally friendly manner.
f Dispose of the components appro-
priately.
If no return or disposal agreement has been
made, dispose of the product yourself.
f If possible, recycle the components.
f Dispose of components which cannot be
recycled according to local regulations.
Disposal with standard waste is not per-
mitted.
102273580-V02.10.2019

12. Appendix

12.1 Conversion of the "Unibox
RTL" (to individual room
temperature control "Unibox
T")
NOTICE
Damage to the screed as a re-
sult of incorrect temperatures
f Carry out the incremental heating
test of concrete and calcium sul-
phate screed in accordance with
DIN EN 1264-4.
f Observe the instructions
of the screed manufacturer.
f Adapt the flow temperature to the
surface temperature regulation
system.
f Do not exceed the screed temper-
ature specified as per DIN 1264-4
near the heating pipes.
If the "Unibox RTL" is installed in the supply
pipe, correct functioning is no longer guaran-
teed. You have to convert the "Unibox RTL"
from a return temperature limitation to an indi-
vidual room temperature control "Unibox T". To
do so, replace the thermostat, the valve insert
and the cover.
Required acces-
sories
Thermostat "Uni LH"
Valve insert
Cover
1. Remove the cover with the handwheel.
2. Unscrew the thermostat "RTL".
Maintenance
Item no.
e.g. 1011465 (white)
or 1011469 (chrome
plated)
1187047
1022693 (white, RAL
9016) or 1022694
(chrome plated)
35