Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Memory; Setting The Distance - Kalenji 900 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 36
When the stopwatch is running, you can display successive split times and lap times on their
respective lines by successively pressing the SPLIT/LAP button.
The split time counter will be incremented each time you press the button.
Once you reach the gure 299, the counter fl ashes to show that the memory is full.
The word FULL appears on the display.
When you stop the stopwatch ( START/STOP ), a nal lap time is added to the memory.

7.3 Using the memory

When using the stopwatch, the rst 299 split times and lap times are saved in the memory. They can
be viewed whether the stopwatch is running or not, by pressing the RECALL button.
The order in which the information is displayed changes depending on whether the
stopwatch is running or not.
• If the stopwatch is running:
Press RECALL successively to display the saved times one after the other in the following order:
- The fastest lap time ( FAST )
- The slowest lap time ( SLOW )
- The average lap time over the X saved times ( AVG )
- The last lap time (x)
- The second last lap time (x-1)
...
- the rst lap time (1)
• If the stopwatch is not running:
Press RECALL successively to display the saved times one after the other in the following order:
- The fastest lap time ( FAST )
- The slowest lap time ( SLOW )
- The average lap time over the X saved times ( AVG )
- The FIRST lap time (1)
- The SECOND lap time (2)
...
- The second last lap time (x-1)
- The last lap time (x)
16
8 / Speed calculation mode (SPEED)
Time elapsed
Counter

8.1 Setting the distance

Carry out the same process for all the distance gures. The point between the gures represents the
decimal point. 1.435 corresponds to 1.435 km or 1.435 miles.
Once all the settings are completed, press RECALL to exit the settings mode.
8.2 Operation in Speed Mode
Set the distance to be measured in advance.
The stopwatch is started/stopped by pressing the START/STOP button. You can add several times to
each other by pressing START/STOP again between each time.
Lap time
Distance set, then
speed when in
operation
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis