Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS ON CHANGING BRAKE PAD
75
STEP 1:
Remove Nylon Nut (No.
58)
which
is
under
Tension Knob (No. 11)
with Wrench (No. 75)
first, and then adjust the
Brake Resistance to least
amount of resistance.
STEP 2:
Push Left Brake Pad
Holder
(No.
separated from its Clamp
Brake Assembly (No.
64) by hand.
STEP 3:
Take
down
the
Brake Pad Holder (No.
65).
STEP 4:
Push Right Brake Pad
Holder
(No.
separated from its Clamp
Brake Assembly (No.
64) by hand.
STEP 5:
Take down the Right
Brake Pad Holder (No.
65).
65)
Left
65)
75
14
STEP 6:
Insert the new Right
Brake Pad Holder (No.
65) into the Right Clamp
Brake Assembly (No.
64).
STEP 7:
Open the Left Clamp
Brake Assembly (No.
64) with hand.
STEP 8:
Insert
the
new
Left
Brake Pad Holder (No.
65) into the Left Clamp
Brake Assembly (No.
64).
STEP 9:
After tightening up the
Tension Knob (No. 11)
put the Nylon Nut (No.
58) onto and fix it with
Wrench (No. 75) to the
normal working place.
STEP 10:
Put
down
the
Brake
Handle (No. 9) by Left
hand; and tap the Brake
pad
inside
its
clamp
brake
assembly
wooden mallet (or plastic
mallet) gently by right
hand.
with
Werbung
Inhaltsverzeichnis
