Panasonic CZ-TACG1 Benutzerhandbuch Seite 8

3.2 Connect with AP Mode
i. Press and hold the "SETUP" button on the network
adaptor for 10 seconds.
ii. Release the "SETUP" button when the STATUS LED
starts to blink in orange.
iii. Tap "NEXT".
iv. Tap "To wireless network settings of the smartphone"
to change the wireless network connection of the
smartphone to the following network, the smartphone
will connect to the network adaptor.
SSID: Panasonic-CZ-T-wirelessAP
Password: Rac8pswa
v. A window will prompt, tap "Copy password and next"
to proceed to smartphone wireless network setting.
vi. Connect to "Panasonic-CZ-T-wirelessAP" network
and back to the application to continue with the
setup.
vii. Tap "To wireless network setting" to setup the
viii. Connect the network adaptor to wireless router.
ix. Enter the password of the selected wireless router.
x. The LINK LED will light up when the network
8
wireless network connection of the network
adaptor.
Select your wireless router.
adaptor successfully connects to the server.
Tap "NEXT" and proceed to instruction 4.
* During network adaptor connecting to wireless
router, STATUS LED and LINK LED will blink
simultaneously.