Using The Tv As A Pc Monitor - Philips Flat TV 20PFL5122 Bedienungsanleitung

Using the TV as a PC Monitor

NOTE
• When using the TV as a PC monitor, slight diagonal interference lines may be observed when
it is operated under electromagnetic interference environment. This does not affect the
performance of the TV.
• For better performance, use a good quality DVI cable.
IMPORTANT
For the TV to function as PC monitor, the
following step must be taken :
The DVI-I input of your TV MUST be
connected to the DVI output of the PC. Device
with only VGA connector can be connected with
a VGA to DVI adaptor. For more information on
connection, see page 16.
Choosing PC mode
Press the key on the remote control
to display the Source List.
Source
TV
Æ
EXT1
AV / SVHS
PC
HD
FM Radio
Use the Î ï key to select PC. Use the Æ
switch the TV to PC mode.
key to
To return to TV mode, press the
select TV and confirm with the Æ key.
Using the PC menus
Supported PC display format
Analogue and
Digital PC mode
Resolution
640 x 350
1
640 x 480
2
800 x 600
3
832 x 624
4
1024 x 768
5
1280 x 768
6
√ Supported
12
Source
TV
EXT1
AV / SVHS
PC
Æ
HD
FM Radio
key,
20'/51cm
4:3
VGA
√
√
X
X
X
X
X Not Supported
H
Press the key to display the PC menu.
Use the Î ï keys to access the settings.
Use the Í Æ keys to select or adjust the
setting. (The settings are automatically saved).
PC menu settings
• Picture :
– Brightness / Contrast: to adjust the
brightness and contrast.
– Horizontal / Vertical*: to adjust the
horizontal and vertical placing of the image.
– Colour Temp : this changes the colour
rendering : Cool (bluer), Normal (balance)
or Warm (redder).
• Audio Selection : to choose the sound
reproduced on the TV (TV, PC or FM).
• Features:
– Phase/Clock* : eliminates the horizontal
(Phase) and vertical (Clock) interfering lines.
– Format : For widescreen set, you can choose
between full screen or native format. For 4:3
set, only Native format is available.
– Auto Adjust* : Picture position and
Phase/Clock are set automatically.
• Reset To Factory Setting: to return to the
factory settings (default settings).
* These adjustments are only available when
connected to a computer with VGA output.
23'/58cm
16:9
WXGA
X
√
√
X
√
√