Using The Radio; Using In Pc Monitor Mode - Philips 26PF894612 Bedienungsanleitung

Using the radio

Choosing radio mode
Press the
switch the TV to radio mode. Press the
key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.
Selecting programmes
Use the
FM stations (from 1 to 40).
List of radio stations
Press the
radio stations. Then use the cursor to select a
station.

Using in PC monitor mode

PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
You must first of all connect the computer and
adjust the resolution (see p.11).
Choosing PC mode
Press the
switch the TV to PC-A mode
D mode
to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.
Using PIP
While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI In (see p. 11).
& Press the œ key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Subsequent presses of the œ key changes the
size of the window, switches to dual screen
and turns PIP off.
" Use the @
programmes of the PIP screen or the
you want to display a picture from an appliance
connected to the TV (e.g. video recorder,
DVD).
Downloaded from www.Manualslib.com
Z
key on the remote control to
0 9
or @ # keys to select the
/
P
ı
key to display / hide the list of
V
key on the remote control to
(VGA In)
X
. Press the key to return
(DVI In)
# keys to change the
P
manuals search engine
Using the radio menus
H
Use the
X
settings.
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the
(for a complete search) or
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the
Features
the screen saver.
Using the PC menus
H
Press the
the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :
• :
Picture
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
or PC-
-
Adjust Colour
normal or warm).
•
Audio Selection
reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.
• :
Features
-
Phase/Clock
( ) and vertical (
Phase
-
View Format
or the original format of the PC screens.
-
PIP Controls
of the PIP screen.
-
Auto Adjust
•
Reset To Factory Setting
factory settings (default settings).
•
Mode Select
n
key if
mode.
*These adjustments are not available when a
computer is connected to the
key to access the specific radio
menu :
Install Auto Store
Manual Store
menu you can activate / close
key to access the specific settings of
: to adjust the
: to adjust the horizontal
: to adjust the colours (cold,
: to choose the sound
* : eliminates the horizontal
) interfering lines.
Clock
: to choose between large screen
: to adjust the size and position
: position is set automatically.
: to return to the
: to come back to TV or radio
.
DVI In
(for
9