Analogue Teletext; Using In The Pc Monitor Mode - Philips 37PF5520D Bedienungsanleitung

Using in PC monitor mode
NOTE
– When using the TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under
electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a superimposed
image to watch the TV channels at the same time.
The PIP function only works if your PC has a digital
output. You must first of all connect the computer and
adjust the resolution (see p.18).
Choosing PC mode
& Press the AV key on the remote control to
display the Source List.
é Use the o œ keys to select PC and
then press the cursor É key to switch the TV
to PC mode (DVI In).
To return to TV mode, press the AV key, select
TV and validate with É key.
Using PIP
While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI In (see p. 21).
& Press the æ key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Subsequent presses of the æ key changes
the size of the window, switches to dual
screen and turns PIP off.
" Use the P –/+ keys to change the programmes
of the PIP screen.
Here is the list of the different display resolutions available on your TV :
Digital PC (DVI-I)
Analogue PC (YPbPr)
16
Using the PC menus
Press the MENU key to access the specific
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
• Picture:
- Brightness / Contrast : to adjust the
- Horizontal / Vertical* : to adjust the
- Colour Temp. : this changes the colour
• Audio Selection: to choose the sound
• Features:
- Phase/Clock*: eliminates the horizontal
- Format : to choose between full screen or
- PIP : to adjust the size and position of the PIP
- Auto Adjust*: position is set automatically.
• Reset To Factory Setting: to return to the
640 x 350 p
640 x 480 p
720 x 400 p
640 x 350 p
640 x 480 p
brightness and contrast.
horizontal and vertical placing of the image.
rendering : Cold (bluer), Normal (balanced) or
Warm (redder).
reproduced on the TV (PC/HD or TV).
(Phase) and vertical (Clock) interfering lines.
native format of the PC screens.
screen.
factory settings (default settings).
* These adjustments are not available when a
computer is connected to the DVI In .
800 x 600 p
832 x 624 p
1024 x 768 p
720 x 400 p
800 x 600 p
1152 x 864 p
1280 x 960 p
1280 x 1024 p
832 x 624 p
1024 x 768 p