Hilti SF 14-A Handbuch Seite 28

4.2 Noise information and vibration values determined in accor-
dance with EN 60745
Typical A-weighted sound power level
Typical A-weighted emission sound
pressure level
Uncertainty for the given sound levels
Vibration emission value for screwdriv-
ing (a )
h
Uncertainty (K )
h
Hammer drilling in masonry (max. length
100 mm)
Uncertainty (K)
Vibration emission value for drilling in
metal (a )
h, D
Uncertainty (K)
5 Operation
5.1 Adjusting the side handle
▶ Adjust the side handle to the desired position.
5.2 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and
that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop
out and fall, thereby presenting a hazard to other persons.
▶ Push the battery into the tool from the rear until it engages with an audible
click.
22 English
Printed: 15.03.2019 | Doc-Nr: PUB / 5071625 / 000 / 04
SF 14-A
86 dB
75 dB
3 dB
2.5 m/s²
1.5 m/s²
•/•
1.5 m/s²
2.5 m/s²
1.5 m/s²
4
3
2009596
SFH 14-A
102 dB
91 dB
3 dB
2.5 m/s²
1.5 m/s²
4 mm ...
12 mm
1.5 m/s²
2.5 m/s²
1.5 m/s²
*2009596*