Hilti SF 14-A Handbuch Seite 26

Electrical safety
▶ Before starting work, check the working area for concealed electric cables
or gas and water pipes. If you damage an electric cable accidentally,
external metal parts of the power tool may become live and present a risk
of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The
power tool may go off course and veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it
down.
2.4 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
3 Description
3.1 Product overview
Keyless chuck
@
Torque and drilling mode se-
;
lector ring
Side handle
=
Control switch
%
Forward/reverse selector
&
switch with safety lock
Gear speed selection switch
(
20 English
Printed: 15.03.2019 | Doc-Nr: PUB / 5071625 / 000 / 04
1
)
+
§
/
:
Rating plate
Grip
Belt hook (optional)
Battery state of charge indica-
tor
Release button with additional
function (charge state display
activation)
2009596
*2009596*