Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Installation
Installation, initial operation, maintenance and repairs
have to be carried out by authorised and qualified
tradesmen (specialist heating company, authorised
company). (EN 5011 part 1 and VDE 1000 part 10 for
work on electrical appliances.)
Observe warning advice under paragraph 2 (safety
notes)!
5.1
Dimensions / Connection sizes
Return
Illustr. 5.1 Heat meter installation set for "Regumat
S-180" DN 25 with pump ball valve (2015)
Flow
Return
Illustr. 5.2 Heat meter installation set for "Regumat
M3-180" DN 25 with pump ball valve (2015)
5.2 Installation
– Completely disconnect the controller (all poles)
supplying power to the system components (pump,
actuator) from the power supply (pull out the power
plug).
– Close the isolating ball valves of the product assembly
and isolate all other supply pipes of the concerned
section.fenden Abschnitts absperren.
Required tools
Size 30 mm
Spanner
Size 38 mm
Flow
Torque
50 Nm
7
Werbung
Inhaltsverzeichnis
