Specifications; Safety Warnings - Makita DDF483 Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
D r i l l i n g c a p a c i t i e s
F a s t e n i n g c a p a c i t i e s
N o l o a d s p e e d
O v e r a l l l e n g t h
R a t e d v o l t a g e
B a t t e r y c a r t r i d g e
N e t w e i g h t
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
Specifications and battery cartridge may differ from country to country.
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 0 / 0
Intended use
The tool is intended for drilling and screw driving in
w o o d , m e t a l a n d p l a s t i c .
Noise
The typical A-weighted noise level determined accord-
ing to EN 07 5:
Sound pressure level (L
pA
Uncertainty (K) : dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
W ear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN 07 5:
Work mode: drilling into metal
ibration emission (a ) : .5 m/s
h , D
Uncertainty (K) : .5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
a n o t h e r .
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
S t e e l
W o o d
W o o d s c r e w
M a c h i n e s c r e w
H i g h ( 2)
L o w ( 1)
) : 77 dB(A)
2
o r l e s s
2
DDF483
162 m m
B L 18 15 N , B L 18 20, B L 18 20B , B L 18 3 0, B L 18 3 0B , B L 18 4 0,
B L 18 4 0B , B L 18 5 0, B L 18 5 0B , B L 18 60B
1.2 - 1.6 k g
, are shown in the table.
The vibration emission during actual
WARNING:
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
Be sure to identify safety measures
WARNING:
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY W ARNINGS
General pow er tool safety w arnings
WARNING:
Read all safety w arnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all w arnings and instruc-
tions for future reference.
The term power tool in the warnings refers to your
mains-operated (corded) power tool or battery-operated
( c o r d l e s s ) p o w e r t o o l .
4 ENGLISH
DDF083
13 m m
3 6 m m
6 m m x 75 m m
M 6
- 1
0 - 1, 700 m i n
- 1
0 - 5 00 m i n
124 m m
D .C . 18 V
1.1 - 1.4 k g