ZAMEL VP-807B Bedienungsanleitung Seite 20

WIRING SPECIFICATIONS
The system supports two electric strike release configurations: with the open
command output by (i) an entrance panel or (ii) a system display (the display open
command output wire must have the shield connected to earth).
If the open command is output by an entrance panel, follow this wiring specification:
 If the entrance panel is < 30 m away from the video entry phone display, use
YTDYw 4x0.5 mm2 wiring.
Tekst Translation
MONITOR DISPLAY
CZERWONY RED
NIEBIESKI BLUE
ŻÓŁTY YELLOW
BIAŁY WHITE
ZIELONY GREEN
BRĄZOWY BROWN
CZARNY BLACK
ELEKTROZACZEP ELECTRIC STRIKE
PANEL ZEWNĘTRZNY ENTRANCE PANEL
If the entrance panel is > 30 m away from the video entry phone display, use

YTDYw 4x0.5 mm2 wiring.
If the open command is output by a display, follow this wiring specification:
 If the entrance panel is < 30 m away from the video entry phone display, use
YTDYw 6x0.5 mm2 wiring.
 If the entrance panel is < 30 m away from the video entry phone display, use
YTDYw 6x0.8 mm2 wiring.
7