ZAMEL VP-807B Bedienungsanleitung Seite 22

INTERNAL CALLS (DISPLAY-TO-DISPLAY INTERCOM MODE)
The intercom mode allows two-way voice calls between two specific displays in the
video entry phone system. Touch on the display in standby to call another
display in the system. If you have more than 2 displays in the video entry phone
system, choose the display you wish to call with
confirm and make the call. The user at the display being called can touch
answer the call or to reject the call.
DISPLAY SOUND VOLUME / BRIGHTNESS / COLOUR / CONTRAST / IMAGE
TYPE CONTROL
Touch or in the monitoring, incoming call, voice call, intercom, or public
address mode to adjust the sound volume. Touch
Brightness / Colour / Contrast / Image Type menu. Operate the controls with
or .
DO NOT DISTURB MODE
You can enable or disable the DO NOT DISTURB mode in the display System
Settings menu. With the display in standby, touch and hold
disable the Do Not Disturb mode.
DISPLAY MICROPHONE MONITORING
With the display in standby, touch and hold
microphone of another display in the voice entry phone system. If you have more
than 2 displays in the video entry phone system, choose the display you wish to
listen to by touching or and confirm with
Note:
a) The user of the display that is listening will hear everything that the microphone
of the display being listened to captures. The display being listened to will not
output the sounds captured by the microphone of the display which is listening.
b) If you have more than 2 displays in the video entry phone system, verify that
the remote listening mode is enabled in the display you want to listen to. Go to
System Settings and verify that Can Be Monitored is set to Enable.
9
or . Next, touch to
to
to open the Volume /
to enable or
to start listening through the
.