Herunterladen Inhalt Inhalt Diese Seite drucken

ZAMEL VP-807B Bedienungsanleitung Seite 21

Videomonitor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ANSWERING AN ENTRANCE PANEL CALL
When a visitor presses the Call button on the entrance panel, all connected indoor
displays will sound the call chime at the same time with the INCOMING CALL
message on each display screen. Touch the
again to output the calling entrance panel camera feed on all other displays. If
you touch
before the call is switched by a user of another display in the
system, you will return to the calling visitor. If the call is not answered by the time the
call chime stops, the display will enter the standby mode. Touch the
release the electric strike of the calling entrance panel during the call. The display
will show DOOR OPEN. Touch the
icon to open the gate. The display will
show GATE OPEN. If another call is coming in during your call, the display will show
VISITOR AT DOOR 2. Touch the
icon to answer and switch to the second call.
Note: Touch and hold the
icon during an entrance call or an internal call
(display-to-display intercom mode) to mute your microphone. The display will show
MUTE. Touch and hold
again to unmute your microphone, which the display
will confirm with SPEAK. Operating a gate requires the NC-06 gate control module
in the system.
VIDEO FEED MONITORING
With the display in standby, touch and hold
entrance panel no. 1. Touch
again to switch to the next video feed.
The CCTV camera video feeds can only be monitored this way if the Port 4 status is
enabled (see Table SYSTEM SETTINGS, item 10).
Touch
to start a voice call with the visitor at the entrance panel you are
monitoring the video feed from. Touch
to unlock the door of the same
entrance panel.
When monitoring the video feed from Door1/Door2/CCTV1/CCTV2, touch and hold
to change the screen aspect from 16:9 to 4:3.
PUBLIC ADDRESS MODE
The Public Address mode allows you to speak through all displays connected to the
video entry phone system. When the display is in standby, touch and hold
the screen. The PUBLIC ADDRESS CALL message will be displayed. All other
displays in the system will display PUBLIC ADDRESS. You can now speak and be
received by other displays in the system. Touch
mode.
8
icon to answer the call. Touch
icon to
to monitor the video feed from the
on
to exit the public address

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vp-807w

Inhaltsverzeichnis