Lifting And Handling - WERTHER INTERNATIONAL PRM50 Bedienungs- Und Wartungsanlitung

MAINTENANCE MANUAL FOR MOTORIZED HYDRAULIC
GB
WORKSHOP PRESSES
Models: PRM50 - PRM100
RESPONSIBILITY OF PRESS OWNER AND/OR USER
This manual is an integral part of the press and must always be kept close to it, even if the
press is sold. The press owner and/or user must know the operating instructions and recom-
mendations before using the press. If the operator does not fully understand the language of
this manual, the instructions must be read and explained in his native language, making sure
that the meaning is understood.
The manufacturer cannot be held responsible for any damage to persons or objects due to an
improper or unpermitted use of the press.
PACKING
The press is shipped in a single package protected by plastic material (pluriball).
Weight of the presses: PRM50: 420 kg – PRM100: 950 kg.

LIFTING AND HANDLING

The presses must be handled and positioned using fork-lift trucks or workshop cranes which
support the a.m. weight (Fig. 1).
When the machine arrives, check that it has not been damaged during transport and that no
part stated in the packing list is missing.
STORAGE
The packing must be kept in a covered and sheltered place, at a temperature between -10° and
+40°C.
REMOVAL OF THE PACKING
The packing can be recycled in accordance with the laws of the country where the press is in-
stalled.
The press has been designed and built in compliance with the following:
LAWS
European directives: 2004/108/CE - 2006/42/CE - 2006/95/CE
TECHNICAL STANDARDS
European standards: EN ISO 12100/1 2005 - EN ISO 12100/2 2005
ELECTRIC PLANT
UNI EN 60204-1
I ATTENTION
For other uses not covered by the Manual of the press, according to Ministerial Decree Legisla-
tive Decree 81/2008 updated Article 16-19, the security manager of the site must make an inte-
gration of risk analysis and provide any additional devices concordandoli safety with the
manufacturer.
15