Installing/Removing Main Memory - Fujitsu Siemens Computers D2703 Bedienungsanleitung

Installing/removing main memory

Technical data
Technology
Total size
Module size
A current list of the memory modules recommended for this mainboard is available
on the Internet at: "www.fujitsu-siemens.com/mainboards".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may use only unbuffered 1.8 V memory modules without ECC.
DDR2-memory modules must meet the PC2-5300U or PC2-6400U specification.
The mainboard D2703-A has one main memory slot. The mainboard D2703-S has two.
Maximum system performance is achieved when the same memory size is
used in Channel A and Channel B (only D2703-S).
With a memory configuration of 4 GB the visible and usable main memory can
be reduced to 3.5 GB (depending on the system configuration).
slot 2
slot 1
The installation/removal is described in the "Basic information on mainboard" manual.
A26361-D2703-Z110-1-7419, edition 1
DDR2 667 / DDR2 800 unbuffered SO-DIMM modules 200 pin; 1.8
V; 64 Bit, no ECC
128 MBytes to 4 GBytes DDR2 (D2703-S)128 MBytes to 2 GBytes
DDR2 (D2703-A)
128, 256, 512, 1024 or 2048 MBytes per module
Channel B
Channel A
Brief description of mainboard
English - 3