Fujitsu Siemens Computers D2703 Bedienungsanleitung Seite 14

Brief description of mainboard
Procedure
1
1
► Remove any fan and the heat sink.
► Use a flathead screwdriver. Turn the screw (1) 180° anti-clockwise.
► Remove the processor from the slot (2).
► Insert the new processor in the slot.
► Turn the screw (1) 180° clockwise.
The socket with the processor clicks into place.
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
► Depending on the configuration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fitting it.
2 - English
2
2
1
A26361-D2703-Z110-1-7419, edition 1