Fort 300 W Bedienungs- Und Wartungsanleitungen Seite 58

Use and maintenance instructions: PRELIMINARY INFORMATION
SECTION 1:
PRELIMINARY INFORMATION
1.1 FOREWORD
This manual reports the information, the instructions and what is considered necessary
for the knowledge, the good use and the normal maintenance of the electric transpor-
ter , hereinafter referred to also machine, manufacture by "FORT s.r.l. Unipersonale"
di Sossano (Vicenza) Italy, hereinafter referred to also as Manufacturing Company.
What is reported does not constitute a complete description of the several components
or a detailed exposition of their operation, the user however, will find what is ordinary
useful to know for a safety use and good maintenance of the machine. The complian-
ce with and the fulfilment of what is described in this manual depends on the regular
operation, the duration in time and the economy of operation of the machine itself.
The non compliance with what is described in this manual, the operational negligence,
a misuse of the machine and the carrying out of unauthorized changes are the causes
for a voidance of the warranty of the machine by the Manufacturing Company.
Moreover, the Manufacturing Company declines any and whatever responsibility for
direct or indirect damages due to the above mentioned reasons and for the non com-
pliance with what is written in this manual.
For any repair or revision implying complex operations, it is necessary to contact the
authorized after- sale services who have specialized personnel or directly the Manu-
facturing Company which is, anyhow, at the complete disposal for granting a ready
and accurate technical assistance and what is necessary to restore the full machine
efficiency.
This manual is an integral part of the machine and it must always accompany it
in any move or resale.
It must be kept in a safe area know by the personnel in charge.
The personnel in charge must keep it intact in order to allow its consulting du-
ring the entire machine life.
In case it is damaged or lost, it is necessary to immediately require a copy to the
Manufacturing Company.
58