Revo SuperSystem Bedienungsanleitung Seite 40

SYSTEM SETTINGS
SETUP WIZARD
The SETUP WIZARD automatically runs when you fi rst power up your
SUPERSYSTEM, and it can be accessed again in this menu. It simplifi es
the set-up of both time/date and internet settings, by running
through a series of questions.
To access the SETUP WIZARD, press
followed by SYSTEM SETTINGS. Now select SETUP WIZARD from the
menu list.
INFO
When dealing with a technical support issue, you may be asked for
the SOFTWARE VERSION or RADIO ID number. Both these pieces of
information can be found under the INFO heading, in the SYSTEM
SETTINGS menu.
Press then select MAIN MENU, followed by SETTINGS, then INFO.
BRIGHTNESS
SUPERSYSTEM allows a degree of control over the brighnress of its
OLED display.
SUPERSYSTEM's ON LEVEL, for use in normal operation, can be set to
LOW, MEDIUM or HIGH.
SUPERSYSTEM's DIM LEVEL, for use in Standby mode, can be set to OFF,
LOW, MEDIUM or HIGH.
It is also possible to set the TIMEOUT duration - a delay on the screen
brightness changing when you enter Standby mode.
Note: If 'OFF" is selected, SUPERSYSTEM's display will switch off whilst
in Standby mode. You can wake the display by simply pressing any
button or touching the front metal panel.
40
then select MAIN MENU,
System settings
Language
Factory reset
Software Update
Setup Wizard >
Info
Info
SW version:
domino_V2.0.16.25756-5
Radio ID:
00226100C3D6
Brightness
Timeout >
On level >
Dim level >