Power Supply; Usb Connection; Operation - Peaq PDR110BT Bedienungsanleitung

ENGLISH

Power supply

Connect the DC connector of the adaptor
to the DC IN-jack. Plug the adaptor to a
power socket.
Connections
AUX-IN
This radio allows you to listen to external
audio devices.
1. Connect a cable (not included) to the
AUX-IN jack (3.5 mm) at the back of
the radio.
2. Press Mode to select AUX.
3. Start playback from the device.
Attention
Before connecting an external playback
device, carefully read the respective user
guide and safety instructions as well as
instructions concerning usage with other
devices.
HEADPHONE CONNECTION
Connect the headphones to the Head-
phone jack of the device.
Attention
Danger! Excessive sound pressure levels
from ear buds and headphones can cause
hearing damage. Listening to loud music
for extended periods of time may lead to
hearing impairment. Keep the volume at
reasonable levels.
32
_PDR110BT-B_160225_V05_A_HR.indb 32

USB connection

Charging external devices
External devices can be charged via USB
with this speaker. Connect the device to
the USB port (output: 5 V/ 1000 mA)
Note: USB music data playback is not
possible.

Operation

ADJUSTING THE ANTENNA
For optimal reception, extend the antenna,
move to fully extend and adjust it.
TURNING THE UNIT ON
Press the power/standby button to turn the
unit on.
ADJUSTING THE VOLUME
The volume can be adjusted during play-
back with the volume control.
25/2/16 7:27 PM